TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Our website uses cookies and other technologies to ensure you get the best browsing experience.

You can change your cookie settings at any time.

Find out more on how we use cookies.

New 12.00-13.99 mm (.472”-.551”) Gundrills Carrying Inserts with 2 Cutting Edges
NPA 23/2019 Metric and Inch


TRIDEEP

Highlights
ISCAR and UNITAC are expanding the lower diameter range of the GD-DH gundrill family by adding drills in the diameter range of 12.0 to 13.99 mm (.472”-.551”) carrying a new LOGT 060204R-DT insert featuring 2 chip splitting cutting edges.


GD-DH
Gundrills for machining centers and gundrill machines, carrying LOGT inserts that feature 2 chip splitting cutting edges, and a wiper for high hole surface quality and high feed.
The drills are now available in the diameter range of Ø12 - Ø13.99 mm (.472”-.551”) and in 15, 20 and 25 drilling length to diameter ratios.
Longer gundrills up to 2400 mm (95”) length can be supplied on request.
The new LOGT 060204R-DT IC908 insert features 2 chip splitting cutting edges, a positive rake chipbreaker, and a wiper for high hole surface quality.
The new insert is made from IC908, a versatile PVD coated grade.

Advantages
  • Deep drills with a 2 cutting edged insert
  • Highly accurate peripherally ground insert, providing high hole diameter accuracy of IT10
  • Produces narrow chips for efficient chip evacuation, enabling higher feed rates compared to other drills available in the market
  • A wiper on the insert provides extra fine surface finish
  • Direct insert mounting - no adjustment needed for accurate hole diameter
  • Can carry new economical solid carbide guide pads
Availability
GD-DH gundrills are in stock. Longer GD-DH gundrills can be supplied upon request from UNITAC. For European markets, these gundrills are also available from OUTILTEC.
*All tool lists are available on the new product catalog.



GD-DHL Metric
Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
• Note: Gundrills can be supplied with up to 2400 mm length on request.
• Inserts and guide pads should be ordered separately (they are not included with the tools).
• For user guide and cutting conditions, see pages
• Preventative measures:
• Do NOT operate the deep hole drill at full speed before engaging the guide hole.
• Enter the guide hole slowly at a speed of 50 - 100 rpm.
(1) Master insert identification

GD-DH (.500) Inch
Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
• Note: Gundrills can be supplied with up to 95" length on request.
• Inserts and guide pads should be ordered separately (they are not included with the tools).
• For user guide and cutting conditions, see pages
• Preventative measures:
• Do NOT operate the deep hole drill at full speed before engaging the guide hole.
• Enter the guide hole slowly at a speed of 50 - 100 rpm.
(1) Master insert identification


GD-DH (12-13.5) Metric
Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Qualityy
• Note: Gundrills can be supplied with up to 2400 mm length on request.
• Inserts and guide pads should be ordered separately (they are not included with the tools).
• Preventative measures:
• Do NOT operate the deep hole drill at full speed before engaging the guide hole.
• Enter the guide hole slowly at a speed of 50 - 100 rpm.
(1) Master insert identification

LOGT
Deep Drilling Inserts with 2 Chip Splitting Cutting Edges, Positive Rake Chipbreaker and a Wiper

Metric

Inch




GPS
Deep Drilling Solid Carbide Guide Pads

Metric

Inch




Brazed Body
Wide Flute Angle
  • Smooth chip evacuation
Large Cooling Hole
  • Efficient lubrication
  • Longer life of inserts and guide pads
Steel Body
  • Extremely high rigidity
  • Simple direct mounting setup
Flange
  • Superior rigidity for higher speeds and feeds



TEST REPORT
Workpiece material: 34CrMo4 (SCM420H)
Operation: Drilling
Part name: Shaft
Coolant: Emulsion

  ISCAR Competitor
Body GD-DH 12.00-M20-20D-06 Brazed Gundrill
Insert LOGT 060204R-DT IC908  
Guide pad GPS-04-16-055 IC908  
Cutting speed Vc (m/min) 150 (495 sfm) 70 (230 sfm)
Feed rate f (mm/rev) 0.13 (.0051 ipr) 0.03 (.0012 ipr)
Table feed Vf (mm/min) 517 (20.35 inch/min) 56 (2.2 inch/min)
Hole diameter D (mm) 12 (.472”) 12 (.472”)
Hole depth 233 (9.2”) 233 (9.2”)
Result: Productivity is increased by 820%





TEST REPORT
Workpiece material: SAE 4340 (SNCM435H)
Operation: Drilling
Part name: Shaft
Coolant: Oil

  ISCAR Competitor
Body GD-DH 13.00-1100-M20-06 Brazed Gundrill
Insert LOGT 060204R-DT IC908  
Guide pad GPS-04-16-055 IC908  
Cutting speed Vc (m/min) 60 (200 sfm) 60 (200 sfm)
Feed rate f (mm/rev) 0.068 (.0027 ipr) 0.05 (.002 ipr)
Table feed Vf (mm/min) 100 (4 inch/min) 74 (3 inch/min)
Hole diameter D (mm) 13 (.512”) 13 (.512”)
Hole depth 372 (14.65”) 372 (14.65”)
Result: Productivity is increased by 36%





TEST REPORT
Workpiece material: 42CrMo4 (SCM440)
Operation: Drilling
Part name: Mold
Coolant: Emulsion

  ISCAR Competitor
Body GD-DHL 12.00X1650-U03 Brazed Gundrill
Insert LOGT 060204R-DT IC908  
Guide pad GPS-04-16-055 IC908  
Cutting speed Vc (m/min) 75 (250 sfm) 53 (175 sfm)
Feed rate f (mm/rev) 0.078 (.003 ipr) 0.021 (.0008 ipr)
Table feed Vf (mm/min) 156 (6.15 inch/min) 30 (1.20 inch/min)
Hole diameter D (mm) 12 (.472”) 12 (.472”)
Hole depth 380 (15”) 380 (15”)
Result: Productivity is increased by 425%





Material Groups (INCH)



Machining Recommendations for TRIDEEP Drills (INCH)





Material Groups



Machining Recommendations for TRIDEEP Drills (Metric)



The NPA23-2019's pdf file: (includes Inquiry Form) View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved