ISCAR is launching new TANG-GRIP TAG.. HF
inserts for High Feed machining.
TAG...HF new TANG-GRIP inserts designed for high feed parting and grooving operations
The new TAG-HF inserts are suitable for machining at extremely high feeds. They provide a significant increase in productivity when compared with other parting inserts existing in the market today.
The inserts are available in 3, 4 and 5mm width.
Features
Reinforced cutting edge and bigger corner radius designed for extremely high feeds
Can improve productivity by up to 300%
Can be used on all standard tools
Most recommended for use on 35 and 45 mm blades, integral shank tools, and reinforced blades
The recommendations in the table below are for the maximum workpiece diameters that can
be machined by each tool type and insert width when applying high feed.
Insert width
Maximum bar diameter
3mm
4mm
5mm
Blade TGFH 32-
Ø50
Ø60
Ø70
Blade TGSU 35-
Ø60
Ø70
Ø80
Blade TGFH 45-
Ø70
Ø80
Ø90
Test Report for High Feed Chipbreaker HF
Parting Operation with TAG N4HF
Application: Parting Alloy Steel, SAE 4140 bars Ø75mm
Target: To increase tool life at high cutting conditions
Insert
TAG N4C ISCAR
TAG N4 HF ISCAR
Grade
IC808
IC808
Cutting speed (m/min)
120
120
Feed (mm/rev)
0.35
0.35
Depth of cut (mm)
37.5
37.5
Material
SAE 4140 Ø75
SAE 4140 Ø75
Application
Parting bar
Parting bar
Parts per edge
12
37
Results: with the new HF chipbreaker, we improved tool life at a high feed rate
+209% Improvement in Tool Life!
Grooving Operation with TAG N4HF
Application: Grooving Alloy Steel, SAE 4140 bars Ø75mm
Grooving depth 32mm.
Target: To increase tool life at high cutting conditions
Insert
TAG N3CB ISCAR
TAG N3C ISCAR
TAG N3 HF ISCAR
Grade
IC808
IC808
IC808
Cutting speed (m/min)
120
120
120
Feed (mm/rev)
0.35
0.35
0.35
Depth of cut (mm)
32
32
32
Material
SAE 4140 Ø75
SAE 4140 Ø75
SAE 4140 Ø75
Application
Grooving
Grooving
Grooving
Parts per edge
320
220
440
Results: with the new HF chipbreaker, we improved tool life in grooving at a high feed rate compared to C and CB chipbreakers
100% tool life improvement vs C chipbreaker and 37% vs CB chipbreaker!
TAG-HF
Single-Ended Inserts for High Feed Parting, Grooving and Slitting,
Hard Materials and Tough Applications