ISCAR Cutting Tools
 Milling
 
  16MILL
16 Economical Cutting Corners for Fast Metal Removal
F45WG - New 16MILL Fine Pitch Face Mills
ISCAR is introducing new fine pitch face mills which use the 16MILL ONHU 0806.. and ONMU 0806.. inserts.
The F45WG are 45° face mills which are designed for high table speed.
The inserts are clamped on the new tools by using a wedge system which features high clamping security and edge location repeatability (both radial and axial). The wedge clamping system enables easy mounting and indexing of the inserts, a very important feature for fine pitch (high insert density) face mills.
The standard diameter range is from 80 to 250 mm.
The new tools expand the application range of the 16MILL inserts with fine pitch cutters.

Inserts
Each insert has 16 cutting edges, either right- or left-hand.
Maximum depth of cut is 5.5 mm if 16 cutting edges are required,
or 13 mm, in which case only 8 cutting edges can be used.
The insert’s central hole is used for screw clamping on the F45NM coarse pitch milling cutters. 		 
16mill